Code	Message		Remarks
1101	Could not open file stream: [2]. System error: [3]
1301	Cannot create the file '[2]'. A directory with this name already exists.
1302	Please insert the disk: [2]
1303	The Installer has insufficient privileges to access this directory: [2].
1304	Error writing to File: [2]
1305	Error reading from File: [2]; System error code: [3]
1306	The file '[2]' is in use. If you can, please close the application that is using the file, then click Retry.
1307	There is not enough disk space remaining to install this file: [2]. If you can, free up some disk space, and click Retry, or click Cancel to exit.
1308	Source file not found: [2]
1309	Error attempting to open the source file: [3]. System error code: [2]
1310	Error attempting to create the destination file: [3]. System error code: [2]
1311	Could not locate source file cabinet: [2].
1312	Cannot create the directory '[2]'. A file with this name already exists. Please rename or remove the file and click Retry, or click Cancel to exit.
1313	The volume [2] is currently unavailable. Please select another.
1314	The specified path '[2]' is unavailable.
1315	Unable to write to the specified folder: [2].
1316	A network error occurred while attempting to read from the file: [2]
1317	An error occurred while attempting to create the directory: [2]
1318	A network error occurred while attempting to create the directory: [2]
1319	A network error occurred while attempting to open the source file cabinet: [2].
1320	The specified path is too long: '[2]'
1321	The Installer has insufficient privileges to modify this file: [2].
1322	A portion of the folder path '[2]' is invalid. It is either empty or exceeds the length allowed by the system.
1323	The folder path '[2]' contains words that are not valid in folder paths.
1324	The folder path '[2]' contains an invalid character.
1325	'[2]' is not a valid short file name.
1326	Error getting file security: [3] GetLastError: [2]
1327	Invalid Drive: [2]
1328	Error applying patch to file [2]. It has probably been updated by other means, and can no longer be modified by this patch. For more information contact your patch vendor. System Error: [3]		Available with Windows Installer version 1.1 and later.
1329	A file that is required cannot be installed because the cabinet file [2] is not digitally signed. This may indicate that the cabinet file is corrupt.		Available with Windows Installer version 2.0.
1330	A file that is required cannot be installed because the cabinet file [2] has an invalid digital signature. This may indicate that the cabinet file is corrupt.{ Error [3] was returned by WinVerifyTrust.}		Available with Windows Installer version 2.0.
1331	Failed to correctly copy [2] file: CRC error.		Available with Windows Installer version 2.0.
1332	Failed to correctly move [2] file: CRC error.		Available with Windows Installer version 2.0.
1333	Failed to correctly patch [2] file: CRC error.		Available with Windows Installer version 2.0.
1334	The file '[2]' cannot be installed because the file cannot be found in cabinet file '[3]'. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.		Available with Windows Installer version 2.0.
1335	The cabinet file '[2]' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.		Available with Windows Installer version 2.0.
1336	There was an error creating a temporary file that is needed to complete this installation. Folder: [3]. System error code: [2]		Available with Windows Installer version 2.0.
1401	Could not create key: [2]. System error [3].
1402	Could not open key: [2]. System error [3].
1403	Could not delete value [2] from key [3]. System error [4].
1404	Could not delete key [2]. System error [3].
1405	Could not read value [2] from key [3]. System error [4].
1406	Could not write value [2] to key [3]. System error [4].
1407	Could not get value names for key [2]. System error [3].
1408	Could not get sub key names for key [2]. System error [3].
1409	Could not read security information for key [2]. System error [3].
1410	Could not increase the available registry space. [2] KB of free registry space is required for the installation of this application.
1500	Another installation is in progress. You must complete that installation before continuing this one.
1501	Error accessing secured data. Please make sure the Windows Installer is configured properly and try the install again.
1502	User '[2]' has previously initiated an install for product '[3]'. That user will need to run that install again before they can use that product. Your current install will now continue.
1503	User '[2]' has previously initiated an install for product '[3]'. That user will need to run that install again before they can use that product.
1601	Out of disk space -- Volume: '[2]'; required space: [3] KB; available space: [4] KB
1602	Are you sure you want to cancel?
1603	The file [2][3] is being held in use by the following process: Name: [4], Id: [5], Window Title: '[6]'.
1604	The product '[2]' is already installed, and has prevented the installation of this product.
1605	Out of disk space -- Volume: '[2]'; required space: [3] KB; available space: [4] KB. If rollback is disabled, enough space is available. Click Cancel to quit, Retry to check available disk space again, or Ignore to continue without rollback.
1606	Could not access location [2].
1607	The following applications should be closed before continuing the install:
1608	Could not find any previously installed compliant products on the machine for installing this product
1609	An error occurred while applying security settings. [2] is not a valid user or group. This could be a problem with the package, or a problem connecting to a domain controller on the network. Check your network connection and click Retry, or Cancel to end the install. Unable to locate the user's SID, system error [3]		Available in Windows Installer version 2.0.
1651	Admin user failed to apply patch for a per-user managed or a per-machine application which is in advertise state.		Available in Windows Installer version 3.0.
1701	[2] is not a valid entry for a product ID.
1702	Configuring [2] cannot be completed until you restart your system. To restart now and resume configuration click Yes, or click No to stop this configuration.
1703	For the configuration changes made to [2] to take effect you must restart your system. To restart now click Yes, or click No if you plan to manually restart at a later time.
1704	An install for [2] is currently suspended. You must undo the changes made by that install to continue. Do you want to undo those changes?
1705	A previous install for this product is in progress. You must undo the changes made by that install to continue. Do you want to undo those changes?
1706	No valid source could be found for product [2].
1707	Installation operation completed successfully.
1708	Installation operation failed.
1709	Product: [2] -- [3]
1710	You may either restore your computer to its previous state or continue the install later. Would you like to restore?
1711	An error occurred while writing installation information to disk. Check to make sure enough disk space is available, and click Retry, or Cancel to end the install.
1712	One or more of the files required to restore your computer to its previous state could not be found. Restoration will not be possible.
1713	[2] cannot install one of its required products. Contact your technical support group. System Error: [3].		Available with Windows Installer version 1.2 and later.
1714	The older version of [2] cannot be removed. Contact your technical support group. System Error [3].		Available with Windows Installer version 1.2 and later
1715	Installed [2].		Available with Windows Installer version 1.2 and later.
1716	Configured [2].		Available with Windows Installer version 1.2 and later.
1717	Removed [2].		Available with Windows Installer version 1.2 and later.
1718	File [2] was rejected by digital signature policy.		Available with Windows Installer version 2.0.
1719	Windows Installer service could not be accessed. Contact your support personnel to verify that it is properly registered and enabled.		Available with Windows Installer version 2.0.
1720	There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your support personnel or package vendor. Custom action [2] script error [3], [4]: [5] Line [6], Column [7], [8]		Available in Windows Installer version 2.0.
1721	There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor. Action: [2], location: [3], command: [4]		Available in Windows Installer version 2.0.
1722	There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action [2], location: [3], command: [4]		Available in Windows Installer version 2.0.
1723	There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. Action [2], entry: [3], library: [4]		Available in Windows Installer version 2.0.
1724	Removal completed successfully.		Available with Windows Installer version 2.0.
1725	Removal failed.		Available with Windows Installer version 2.0.
1726	Advertisement completed successfully.		Available with Windows Installer version 2.0.
1727	Advertisement failed.		Available with Windows Installer version 2.0.
1728	Configuration completed successfully.		Available with Windows Installer version 2.0.
1729	Configuration failed.		Available with Windows Installer version 2.0.
1730	You must be an Administrator to remove this application. To remove this application, you can log on as an administrator, or contact your technical support group for assistance.		Available on Windows Installer version 2.0.
1731	The source installation package for the product [2] is out of sync with the client package. Try the installation again using a valid copy of the installation package '[3]'.		Available beginning with Windows Installer version 2.0 for Windows Server 2003.
1732	In order to complete the installation of [2], you must restart the computer. Other users are currently logged on to this computer, and restarting may cause them to lose their work. Do you want to restart now?		Available beginning with Windows Installer version 2.0 for Windows Server 2003.
1801	The path [2] is not valid
1802	Out of memory
1803	There is no disk in drive [2]. Please, insert one and click Retry, or click Cancel to go back to the previously selected volume.
1804	There is no disk in drive [2]. Please, insert one and click Retry, or click Cancel to return to the browse dialog and select a different volume.
1805	The path [2] does not exist
1806	You have insufficient privileges to read this folder.
1807	A valid destination folder for the install could not be determined.
1901	Error attempting to read from the source install database: [2]
1902	Scheduling restart operation: Renaming file [2] to [3]. Must restart to complete operation.
1903	Scheduling restart operation: Deleting file [2]. Must restart to complete operation.
1904	Module [2] failed to register. HRESULT [3].
1905	Module [2] failed to unregister. HRESULT [3].
1906	Failed to cache package [2]. Error: [3]
1907	Could not register font [2]. Verify that you have sufficient permissions to install fonts, and that the system supports this font.
1908	Could not unregister font [2]. Verify that you have sufficient permissions to remove fonts.
1909	Could not create shortcut [2]. Verify that the destination folder exists and that you can access it.
1910	Could not remove shortcut [2]. Verify that the shortcut file exists and that you can access it.
1911	Could not register type library for file [2]. Contact your support personnel.
1912	Could not unregister type library for file [2]. Contact your support personnel.
1913	Could not update the .ini file [2][3]. Verify that the file exists and that you can access it.
1914	Could not schedule file [2] to replace file [3] on restart. Verify that you have write permissions to file [3].
1915	Error removing ODBC driver manager, ODBC error [2]: [3]. Contact your support personnel.
1916	Error installing ODBC driver manager, ODBC error [2]: [3]. Contact your support personnel.
1917	Error removing ODBC driver: [4], ODBC error [2]: [3]. Verify that you have sufficient privileges to remove ODBC drivers.
1918	Error installing ODBC driver: [4], ODBC error [2]: [3]. Verify that the file [4] exists and that you can access it.
1919	Error configuring ODBC data source: [4], ODBC error [2]: [3]. Verify that the file [4] exists and that you can access it.
1920	Service '[2]' ([3]) failed to start. Verify that you have sufficient privileges to start system services.
1921	Service '[2]' ([3]) could not be stopped. Verify that you have sufficient privileges to stop system services.
1922	Service '[2]' ([3]) could not be deleted. Verify that you have sufficient privileges to remove system services.
1923	Service '[2]' ([3]) could not be installed. Verify that you have sufficient privileges to install system services.
1924	Could not update environment variable '[2]'. Verify that you have sufficient privileges to modify environment variables.
1925	You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation.
1926	Could not set file security for file '[3]'. Error: [2]. Verify that you have sufficient privileges to modify the security permissions for this file.
1927	The installation requires COM+ Services to be installed.		Available with Windows Installer version 1.1 and later.
1928	The installation failed to install the COM+ Application.		Available with Windows Installer version 1.1 and later.
1929	The installation failed to remove the COM+ Application.		Available with Windows Installer version 1.1 and later.
1930	The description for service '[2]' ([3]) could not be changed.		Available with Windows Installer version 1.1 and later.
1931	The Windows Installer service cannot update the system file [2] because the file is protected by Windows. You may need to update your operating system for this program to work correctly. Package version: [3], OS Protected version: [4]		Available with Windows Installer version 1.1 and later.
1932	The Windows Installer service cannot update the protected Windows file [2]. Package version: [3], OS Protected version: [4], SFP Error: [5]		Available with Windows Installer version 1.1 and later.
1933	The Windows Installer service cannot update one or more protected Windows files. SFP Error: [2]. List of protected files:\r\n[3]		Available with Windows Installer version 2.0.
1934	User installations are disabled through policy on the machine.		Available with Windows Installer version 2.0.
1935	An error occurred during the installation of assembly component [2]. HRESULT: [3]. {{assembly interface: [4], function: [5], assembly name: [6]}}		Available with Windows Installer version 2.0.
1935	An error occurred during the installation of assembly '[6]'. Please refer to Help and Support for more information. HRESULT: [3]. {{assembly interface: [4], function: [5], component: [2]}}		Available beginning with Windows Installer version 2.0 for Windows Server 2003..
1936	An error occurred during the installation of assembly '[6]'. The assembly is not strongly named or is not signed with the minimal key length. HRESULT: [3]. {{assembly interface: [4], function: [5], component: [2]}}		Available beginning with Windows Installer version 2.0 for Windows Server 2003.
1937	An error occurred during the installation of assembly '[6]'. The signature or catalog could not be verified or is not valid. HRESULT: [3]. {{assembly interface: [4], function: [5], component: [2]}}		Available beginning with Windows Installer version 2.0 for Windows Server 2003.
1938	An error occurred during the installation of assembly '[6]'. One or more modules of the assembly could not be found. HRESULT: [3]. {{assembly interface: [4], function: [5], component: [2]}}		Available beginning with Windows Installer version 2.0 for Windows Server 2003.
2101	Shortcuts not supported by the operating system.
2102	Invalid .ini action: [2]
2103	Could not resolve path for shell folder [2].
2104	Writing .ini file: [3]: System error: [2].
2105	Shortcut Creation [3] Failed. System error: [2].
2106	Shortcut Deletion [3] Failed. System error: [2].
2107	Error [3] registering type library [2].
2108	Error [3] unregistering type library [2].
2109	Section missing for .ini action.
2110	Key missing for .ini action.
2111	Detection of running applications failed, could not get performance data. Registered operation returned : [2].
2112	Detection of running applications failed, could not get performance index. Registered operation returned : [2].
2113	Detection of running applications failed.
2200	Database: [2]. Database object creation failed, mode = [3].
2201	Database: [2]. Initialization failed, out of memory.
2202	Database: [2]. Data access failed, out of memory.
2203	Database: [2]. Cannot open database file. System error [3].
2204	Database: [2]. Table already exists: [3].
2205	Database: [2]. Table does not exist: [3].
2206	Database: [2]. Table could not be dropped: [3].
2207	Database: [2]. Intent violation.
2208	Database: [2]. Insufficient parameters for Execute.
2209	Database: [2]. Cursor in invalid state.
2210	Database: [2]. Invalid update data type in column [3].
2211	Database: [2]. Could not create database table [3].
2212	Database: [2]. Database not in writable state.
2213	Database: [2]. Error saving database tables.
2214	Database: [2]. Error writing export file: [3].
2215	Database: [2]. Cannot open import file: [3].
2216	Database: [2]. Import file format error: [3], Line [4].
2217	Database: [2]. Wrong state to CreateOutputDatabase [3].
2218	Database: [2]. Table name not supplied.
2219	Database: [2]. Invalid Installer database format.
2220	Database: [2]. Invalid row/field data.
2221	Database: [2]. Code page conflict in import file: [3].
2222	Database: [2]. Transform or merge code page [3] differs from database code page [4].
2223	Database: [2]. Databases are the same. No transform generated.
2224	Database: [2]. GenerateTransform: Database corrupt. Table: [3].
2225	Database: [2]. Transform: Cannot transform a temporary table. Table: [3].
2226	Database: [2]. Transform failed.
2227	Database: [2]. Invalid identifier '[3]' in SQL query: [4].
2228	Database: [2]. Unknown table '[3]' in SQL query: [4].
2229	Database: [2]. Could not load table '[3]' in SQL query: [4].
2230	Database: [2]. Repeated table '[3]' in SQL query: [4].
2231	Database: [2]. Missing ')' in SQL query: [3].
2232	Database: [2]. Unexpected token '[3]' in SQL query: [4].
2233	Database: [2]. No columns in SELECT clause in SQL query: [3].
2234	Database: [2]. No columns in ORDER BY clause in SQL query: [3].
2235	Database: [2]. Column '[3]' not present or ambiguous in SQL query: [4].
2236	Database: [2]. Invalid operator '[3]' in SQL query: [4].
2237	Database: [2]. Invalid or missing query string: [3].
2238	Database: [2]. Missing FROM clause in SQL query: [3].
2239	Database: [2]. Insufficient values in INSERT SQL statement.
2240	Database: [2]. Missing update columns in UPDATE SQL statement.
2241	Database: [2]. Missing insert columns in INSERT SQL statement.
2242	Database: [2]. Column '[3]' repeated.
2243	Database: [2]. No primary columns defined for table creation.
2244	Database: [2]. Invalid type specifier '[3]' in SQL query [4].
2245	IStorage::Stat failed with error [3].
2246	Database: [2]. Invalid Installer transform format.
2247	Database: [2] Transform stream read/write failure.
2248	Database: [2] GenerateTransform/Merge: Column type in base table does not match reference table. Table: [3] Col #: [4].
2249	Database: [2] GenerateTransform: More columns in base table than in reference table. Table: [3].
2250	Database: [2] Transform: Cannot add existing row. Table: [3].
2251	Database: [2] Transform: Cannot delete row that does not exist. Table: [3].
2252	Database: [2] Transform: Cannot add existing table. Table: [3].
2253	Database: [2] Transform: Cannot delete table that does not exist. Table: [3].
2254	Database: [2] Transform: Cannot update row that does not exist. Table: [3].
2255	Database: [2] Transform: Column with this name already exists. Table: [3] Col: [4].
2256	Database: [2] GenerateTransform/Merge: Number of primary keys in base table does not match reference table. Table: [3].
2257	Database: [2]. Intent to modify read only table: [3].
2258	Database: [2]. Type mismatch in parameter: [3].
2259	Database: [2] Table(s) Update failed
2260	Storage CopyTo failed. System error: [3].
2261	Could not remove stream [2]. System error: [3].
2262	Stream does not exist: [2]. System error: [3].
2263	Could not open stream [2]. System error: [3].
2264	Could not remove stream [2]. System error: [3].
2265	Could not commit storage. System error: [3].
2266	Could not rollback storage. System error: [3].
2267	Could not delete storage [2]. System error: [3].
2268	Database: [2]. Merge: There were merge conflicts reported in [3] tables.
2269	Database: [2]. Merge: The column count differed in the '[3]' table of the two databases.
2270	Database: [2]. GenerateTransform/Merge: Column name in base table does not match reference table. Table: [3] Col #: [4].
2271	SummaryInformation write for transform failed.
2272	Database: [2]. MergeDatabase will not write any changes because the database is open read-only.
2273	Database: [2]. MergeDatabase: A reference to the base database was passed as the reference database.
2274	Database: [2]. MergeDatabase: Unable to write errors to Error table. Could be due to a non-nullable column in a predefined Error table.
2275	Database: [2]. Specified Modify [3] operation invalid for table joins.
2276	Database: [2]. Code page [3] not supported by the system.
2277	Database: [2]. Failed to save table [3].
2278	Database: [2]. Exceeded number of expressions limit of 32 in WHERE clause of SQL query: [3].
2279	Database: [2] Transform: Too many columns in base table [3].
2280	Database: [2]. Could not create column [3] for table [4].
2281	Could not rename stream [2]. System error: [3].
2282	Stream name invalid [2].
2302	Patch notify: [2] bytes patched to far.
2303	Error getting volume info. GetLastError: [2].
2304	Error getting disk free space. GetLastError: [2]. Volume: [3].
2305	Error waiting for patch thread. GetLastError: [2].
2306	Could not create thread for patch application. GetLastError: [2].
2307	Source file key name is null.
2308	Destination file name is null.
2309	Attempting to patch file [2] when patch already in progress.
2310	Attempting to continue patch when no patch is in progress.
2315	Missing path separator: [2].
2318	File does not exist: [2].
2319	Error setting file attribute: [3] GetLastError: [2].
2320	File not writable: [2].
2321	Error creating file: [2].
2322	User canceled.
2323	Invalid file attribute.
2324	Could not open file: [3] GetLastError: [2].
2325	Could not get file time for file: [3] GetLastError: [2].
2326	Error in FileToDosDateTime.
2327	Could not remove directory: [3] GetLastError: [2].
2328	Error getting file version info for file: [2].
2329	Error deleting file: [3]. GetLastError: [2].
2330	Error getting file attributes: [3]. GetLastError: [2].
2331	Error loading library [2] or finding entry point [3].
2332	Error getting file attributes. GetLastError: [2].
2333	Error setting file attributes. GetLastError: [2].
2334	Error converting file time to local time for file: [3]. GetLastError: [2].
2335	Path: [2] is not a parent of [3].
2336	Error creating temp file on path: [3]. GetLastError: [2].		Available on Windows Installer version 1.2 and earlier.
2337	Could not close file: [3] GetLastError: [2].
2338	Could not update resource for file: [3] GetLastError: [2].
2339	Could not set file time for file: [3] GetLastError: [2].
2340	Could not update resource for file: [3], Missing resource.
2341	Could not update resource for file: [3], Resource too large.
2342	Could not update resource for file: [3] GetLastError: [2].
2343	Specified path is empty.
2344	Could not find required file IMAGEHLP.DLL to validate file:[2].
2345	[2]: File does not contain a valid checksum value.
2347	User ignore.
2348	Error attempting to read from cabinet stream.
2349	Copy resumed with different info.
2350	FDI server error
2351	File key '[2]' not found in cabinet '[3]'. The installation cannot continue.		Available on Windows Installer version 1.2 and earlier.
2352	Could not initialize cabinet file server. The required file 'CABINET.DLL' may be missing.
2353	Not a cabinet.
2354	Cannot handle cabinet.
2355	Corrupt cabinet.		Available on Windows Installer version 1.2 and earlier.
2356	Could not locate cabinet in stream: [2].
2357	Cannot set attributes.
2358	Error determining whether file is in-use: [3]. GetLastError: [2].
2359	Unable to create the target file - file may be in use.
2360	Progress tick.
2361	Need next cabinet.
2362	Folder not found: [2].
2363	Could not enumerate subfolders for folder: [2].
2364	Bad enumeration constant in CreateCopier call.
2365	Could not BindImage exe file [2].
2366	User failure.
2367	User abort.
2368	Failed to get network resource information. Error [2], network path [3]. Extended error: network provider [5], error code [4], error description [6].
2370	Invalid CRC checksum value for [2] file.{ Its header says [3] for checksum, its computed value is [4].}		Available with Windows Installer version 2.0.
2371	Could not apply patch to file [2]. GetLastError: [3].		Available on Windows Installer version 1.2 and earlier.
2372	Patch file [2] is corrupt or of an invalid format. Attempting to patch file [3]. GetLastError: [4].		Available on Windows Installer version 1.2 and earlier.
2373	File [2] is not a valid patch file.		Available on Windows Installer version 1.2 and earlier.
2374	File [2] is not a valid destination file for patch file [3].		Available on Windows Installer version 1.2 and earlier.
2375	Unknown patching error: [2].		Available on Windows Installer version 1.2 and earlier.
2376	Cabinet not found.
2379	Error opening file for read: [3] GetLastError: [2].
2380	Error opening file for write: [3]. GetLastError: [2].
2381	Directory does not exist: [2].
2382	Drive not ready: [2].
2401	64-bit registry operation attempted on 32-bit operating system for key [2].		Available on Windows Installer version 2.0.
2402	Out of memory.		Available on Windows Installer version 2.0.
2501	Could not create rollback script enumerator.
2502	Called InstallFinalize when no install in progress.
2503	Called RunScript when not marked in progress.
2601	Invalid value for property [2]: '[3]'
2602	The [2] table entry '[3]' has no associated entry in the Media table.
2603	Duplicate table name [2].
2604	[2] Property undefined.
2605	Could not find server [2] in [3] or [4].
2606	Value of property [2] is not a valid full path: '[3]'.
2607	Media table not found or empty (required for installation of files).
2608	Could not create security descriptor for object. Error: '[2]'.
2609	Attempt to migrate product settings before initialization.
2611	The file [2] is marked as compressed, but the associated media entry does not specify a cabinet.
2612	Stream not found in '[2]' column. Primary key: '[3]'.
2613	RemoveExistingProducts action sequenced incorrectly.		Available with Windows Installer version 1.1 and later.
2614	Could not access IStorage object from installation package.		Available with Windows Installer version 1.1 and later.
2615	Skipped unregistration of Module [2] due to source resolution failure.		Available with Windows Installer version 1.1 and later.
2616	Companion file [2] parent missing.		Available with Windows Installer version 1.1 and later.
2617	Shared component [2] not found in Component table.		Available with Windows Installer version 1.1 and later.
2618	Isolated application component [2] not found in Component table.		Available with Windows Installer version 1.1 and later.
2619	Isolated components [2], [3] not part of same feature.		Available with Windows Installer version 1.1 and later.
2620	Key file of isolated application component [2] not in File table.		Available with Windows Installer version 1.1 and later.
2701	The Component table exceeds the acceptable tree depth of [2] levels.
2702	A Feature table record ([2]) references a non-existent parent in the Attributes field.
2703	Property name for root source path not defined: [2]
2704	Root directory property undefined: [2]
2705	Invalid table: [2]; Could not be linked as tree.
2706	Source paths not created. No path exists for entry [2] in Directory table.
2707	Target paths not created. No path exists for entry [2] in Directory table.
2708	No entries found in the file table.
2709	The specified Component name ('[2]') not found in Component table.
2710	The requested 'Select' state is illegal for this Component.
2711	The specified Feature name ('[2]') not found in Feature table.
2712	Invalid return from modeless dialog: [3], in action [2].
2713	Null value in a non-nullable column ('[2]' in '[3]' column of the '[4]' table.
2714	Invalid value for default folder name: [2].
2715	The specified File key ('[2]') not found in the File table.
2716	Could not create a random subcomponent name for component '[2]'.
2717	Bad action condition or error calling custom action '[2]'.
2718	Missing package name for product code '[2]'.
2719	Neither UNC nor drive letter path found in source '[2]'.
2720	Error opening source list key. Error: '[2]'
2721	Custom action [2] not found in Binary table stream.
2722	Custom action [2] not found in File table.
2723	Custom action [2] specifies unsupported type.
2724	The volume label '[2]' on the media you're running from does not match the label '[3]' given in the Media table. This is allowed only if you have only 1 entry in your Media table.
2725	Invalid database tables
2726	Action not found: [2].
2727	The directory entry '[2]' does not exist in the Directory table.
2728	Table definition error: [2]
2729	Install engine not initialized.
2730	Bad value in database. Table: '[2]'; Primary key: '[3]'; Column: '[4]'
2731	Selection Manager not initialized.		The selection manager is responsible for determining component and feature states. It is initialized during the costing actions. A standard action or custom action made a call to a function requiring the selection manager before the initialization of the selection manager. This action should be sequenced after the costing actions.
2732	Directory Manager not initialized.		The directory manager is responsible for determining the target and source paths. It is initialized during the costing actions. A standard action or custom action made a call to a function requiring the directory manager before the initialization of the directory manager. This action should be sequenced after the costing actions.
2733	Bad foreign key ('[2]') in '[3]' column of the '[4]' table.
2734	Invalid reinstall mode character.
2735	Custom action '[2]' has caused an unhandled exception and has been stopped. This may be the result of an internal error in the custom action, such as an access violation.
2736	Generation of custom action temp file failed: [2].
2737	Could not access custom action [2], entry [3], library [4]		Available in Windows Installer versions 1.0, 1.1, and 1.2.
2738	Could not access VBScript run time for custom action [2].
2739	Could not access JavaScript run time for custom action [2].
2740	Custom action [2] script error [3], [4]: [5] Line [6], Column [7], [8].		Available in Windows Installer versions 1.0, 1.1, and 1.2.
2741	Configuration information for product [2] is corrupt. Invalid info: [2].
2742	Marshaling to Server failed: [2].
2743	Could not execute custom action [2], location: [3], command: [4].		Available in Windows Installer versions 1.0, 1.1, and 1.2.
2744	EXE failed called by custom action [2], location: [3], command: [4].		Available in Windows Installer versions 1.0, 1.1, and 1.2.
2745	Transform [2] invalid for package [3]. Expected language [4], found language [5].
2746	Transform [2] invalid for package [3]. Expected product [4], found product [5].
2747	Transform [2] invalid for package [3]. Expected product version < [4], found product version [5].
2748	Transform [2] invalid for package [3]. Expected product version <= [4], found product version [5].
2749	Transform [2] invalid for package [3]. Expected product version == [4], found product version [5].
2750	Transform [2] invalid for package [3]. Expected product version >= [4], found product version [5].
2751	Transform [2] invalid for package [3]. Expected product version > [4], found product version [5].
2752	Could not open transform [2] stored as child storage of package [4].
2753	The File '[2]' is not marked for installation.
2754	The File '[2]' is not a valid patch file.
2755	Server returned unexpected error [2] attempting to install package [3].
2756	The property '[2]' was used as a directory property in one or more tables, but no value was ever assigned.
2757	Could not create summary info for transform [2].
2758	Transform [2] does not contain an MSI version.
2759	Transform [2] version [3] incompatible with engine; Min: [4], Max: [5].
2760	Transform [2] invalid for package [3]. Expected upgrade code [4], found [5].
2761	Cannot begin transaction. Global mutex not properly initialized.
2762	Cannot write script record. Transaction not started.
2763	Cannot run script. Transaction not started.
2765	Assembly name missing from AssemblyName table : Component: [4].		Available with Windows Installer version 2.0.
2766	The file [2] is an invalid MSI storage file.		Available with Windows Installer version 2.0.
2767	No more data{ while enumerating [2]}.		Available with Windows Installer version 2.0.
2768	Transform in patch package is invalid.		Available with Windows Installer version 2.0.
2769	Custom Action [2] did not close [3] MSIHANDLEs.		Available with Windows Installer version 2.0.
2770	Cached folder [2] not defined in internal cache folder table.		Available with Windows Installer version 2.0.
2771	Upgrade of feature [2] has a missing component. .		Available beginning with Windows Installer version 3.0.
2772	New upgrade feature [2] must be a leaf feature.		Available beginning with Windows Installer version 3.0.
2801	Unknown Message -- Type [2]. No action is taken.
2802	No publisher is found for the event [2].
2803	Dialog View did not find a record for the dialog [2].
2804	On activation of the control [3] on dialog [2] CMsiDialog failed to evaluate the condition [3].
2805
2806	The dialog [2] failed to evaluate the condition [3].
2807	The action [2] is not recognized.
2808	Default button is ill-defined on dialog [2].
2809	On the dialog [2] the next control pointers do not form a cycle. There is a pointer from [3] to [4], but there is no further pointer.
2810	On the dialog [2] the next control pointers do not form a cycle. There is a pointer from both [3] and [5] to [4].
2811	On dialog [2] control [3] has to take focus, but it is unable to do so.
2812	The event [2] is not recognized.
2813	The EndDialog event was called with the argument [2], but the dialog has a parent
2814	On the dialog [2] the control [3] names a nonexistent control [4] as the next control.
2815	ControlCondition table has a row without condition for the dialog [2].
2816	The EventMapping table refers to an invalid control [4] on dialog [2] for the event [3].
2817	The event [2] failed to set the attribute for the control [4] on dialog [3].
2818	In the ControlEvent table EndDialog has an unrecognized argument [2].
2819	Control [3] on dialog [2] needs a property linked to it.
2820	Attempted to initialize an already initialized handler.
2821	Attempted to initialize an already initialized dialog: [2].
2822	No other method can be called on dialog [2] until all the controls are added.
2823	Attempted to initialize an already initialized control: [3] on dialog [2].
2824	The dialog attribute [3] needs a record of at least [2] field(s).
2825	The control attribute [3] needs a record of at least [2] field(s).
2826	Control [3] on dialog [2] extends beyond the boundaries of the dialog [4] by [5] pixels.
2827	The button [4] on the radio button group [3] on dialog [2] extends beyond the boundaries of the group [5] by [6] pixels.
2828	Tried to remove control [3] from dialog [2], but the control is not part of the dialog.
2829	Attempt to use an uninitialized dialog.
2830	Attempt to use an uninitialized control on dialog [2].
2831	The control [3] on dialog [2] does not support [5] the attribute [4].
2832	The dialog [2] does not support the attribute [3].
2833	Control [4] on dialog [3] ignored the message [2].
2834	The next pointers on the dialog [2] do not form a single loop.
2835	The control [2] was not found on dialog [3].
2836	The control [3] on the dialog [2] cannot take focus.
2837	The control [3] on dialog [2] wants the winproc to return [4].
2838	The item [2] in the selection table has itself as a parent.
2839	Setting the property [2] failed.
2840	Error dialog name mismatch.
2841	No OK button was found on the error dialog.
2842	No text field was found on the error dialog.
2843	The ErrorString attribute is not supported for standard dialogs.
2844	Cannot execute an error dialog if the Errorstring is not set.
2845	The total width of the buttons exceeds the size of the error dialog.
2846	SetFocus did not find the required control on the error dialog.
2847	The control [3] on dialog [2] has both the icon and the bitmap style set.
2848	Tried to set control [3] as the default button on dialog [2], but the control does not exist.
2849	The control [3] on dialog [2] is of a type, that cannot be integer valued.
2850	Unrecognized volume type.
2851	The data for the icon [2] is not valid.
2852	At least one control has to be added to dialog [2] before it is used.
2853	Dialog [2] is a modeless dialog. The execute method should not be called on it.
2854	On the dialog [2] the control [3] is designated as first active control, but there is no such control.
2855	The radio button group [3] on dialog [2] has fewer than 2 buttons.
2856	Creating a second copy of the dialog [2].
2857	The directory [2] is mentioned in the selection table but not found.
2858	The data for the bitmap [2] is not valid.
2859	Test error message.
2860	Cancel button is ill-defined on dialog [2].
2861	The next pointers for the radio buttons on dialog [2] control [3] do not form a cycle.
2862	The attributes for the control [3] on dialog [2] do not define a valid icon size. Setting the size to 16.
2863	The control [3] on dialog [2] needs the icon [4] in size [5]x[5], but that size is not available. Loading the first available size.
2864	The control [3] on dialog [2] received a browse event, but there is no configurable directory for the present selection. Likely cause: browse button is not authored correctly.
2865	Control [3] on billboard [2] extends beyond the boundaries of the billboard [4] by [5] pixels.
2866	The dialog [2] is not allowed to return the argument [3].
2867	The error dialog property is not set.
2868	The error dialog [2] does not have the error style bit set.
2869	The dialog [2] has the error style bit set, but is not an error dialog.
2870	The help string [4] for control [3] on dialog [2] does not contain the separator character.
2871	The [2] table is out of date: [3].
2872	The argument of the CheckPath control event on dialog [2] is invalid.
2873	On the dialog [2] the control [3] has an invalid string length limit: [4].
2874	Changing the text font to [2] failed.
2875	Changing the text color to [2] failed.
2876	The control [3] on dialog [2] had to truncate the string: [4].
2877	The binary data [2] was not found
2878	On the dialog [2] the control [3] has a possible value: [4]. This is an invalid or duplicate value.
2879	The control [3] on dialog [2] cannot parse the mask string: [4].
2880	Do not perform the remaining control events.
2881	CMsiHandler initialization failed.
2882	Dialog window class registration failed.
2883	CreateNewDialog failed for the dialog [2].
2884	Failed to create a window for the dialog [2].
2885	Failed to create the control [3] on the dialog [2].
2886	Creating the [2] table failed.
2887	Creating a cursor to the [2] table failed.
2888	Executing the [2] view failed.
2889	Creating the window for the control [3] on dialog [2] failed.
2890	The handler failed in creating an initialized dialog.
2891	Failed to destroy window for dialog [2].
2892	[2] is an integer only control, [3] is not a valid integer value.
2893	The control [3] on dialog [2] can accept property values that are at most [5] characters long. The value [4] exceeds this limit, and has been truncated.
2894	Loading RICHED20.DLL failed. GetLastError() returned: [2].
2895	Freeing RICHED20.DLL failed. GetLastError() returned: [2].
2896	Executing action [2] failed.
2897	Failed to create any [2] font on this system.
2898	For [2] textstyle, the system created a '[3]' font, in [4] character set.
2899	Failed to create [2] textstyle. GetLastError() returned: [3].		Available with Windows Installer version 1.1 and later.
2901	Invalid parameter to operation [2]: Parameter [3].
2902	Operation [2] called out of sequence.
2903	The file [2] is missing.
2904	Could not BindImage file [2].
2905	Could not read record from script file [2].
2906	Missing header in script file [2].
2907	Could not create secure security descriptor. Error: [2].
2908	Could not register component [2].
2909	Could not unregister component [2].
2910	Could not determine user's security ID.
2911	Could not remove the folder [2].
2912	Could not schedule file [2] for removal on restart.
2919	No cabinet specified for compressed file: [2].
2920	Source directory not specified for file [2].
2924	Script [2] version unsupported. Script version: [3], minimum version: [4], maximum version: [5].
2927	ShellFolder id [2] is invalid.
2928	Exceeded maximum number of sources. Skipping source '[2]'.
2929	Could not determine publishing root. Error: [2].
2932	Could not create file [2] from script data. Error: [3].
2933	Could not initialize rollback script [2].
2934	Could not secure transform [2]. Error [3].
2935	Could not unsecure transform [2]. Error [3].
2936	Could not find transform [2].
2937	Windows Installer cannot install a system file protection catalog. Catalog: [2], Error: [3].		Available with Windows Installer version 1.2 and later.
2938	Windows Installer cannot retrieve a system file protection catalog from the cache. Catalog: [2], Error: [3].		Available with Windows Installer version 1.2 and later.
2939	Windows Installer cannot delete a system file protection catalog from the cache. Catalog: [2], Error: [3].		Available with Windows Installer version 1.2 and later.
2940	Directory Manager not supplied for source resolution.		Available with Windows Installer version 2.0.
2941	Unable to compute the CRC for file [2].		Available with Windows Installer version 2.0.
2942	BindImage action has not been executed on [2] file.		Available with Windows Installer version 2.0.
2943	This version of Windows does not support deploying 64-bit packages. The script [2] is for a 64-bit package.		Available with Windows Installer version 2.0.
2944	GetProductAssignmentType failed.		Available with Windows Installer version 2.0.
2945	Installation of ComPlus App [2] failed with error [3].		Available with Windows Installer version 2.0.
3001	The patches in this list contain incorrect sequencing information: [2][3][4][5][6][7][8][9][10][11][12][13][14][15][16].		Available beginning with Windows Installer version 3.0
3002	Patch [2] contains invalid sequencing information.		Available beginning with Windows Installer version 3.0